============================================================ USB TO IDE 使用時 (Linux) ------------------------------------------------------------ [ 118.756733] usb 6-8: new high speed USB device using ehci_hcd and address 4 [ 118.889879] usb 6-8: configuration #1 chosen from 1 choice [ 118.890355] usb 6-8: New USB device found, idVendor=05e3, idProduct=0702 [ 118.890360] usb 6-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 118.890363] usb 6-8: Product: USB TO IDE [ 119.156280] Initializing USB Mass Storage driver... [ 119.159106] scsi7 : SCSI emulation for USB Mass Storage devices [ 119.160251] usb-storage: device found at 4 [ 119.160251] usb-storage: waiting for device to settle before scanning [ 119.162360] usbcore: registered new interface driver usb-storage [ 119.162360] USB Mass Storage support registered. [ 124.159274] usb-storage: device scan complete [ 124.197117] scsi 7:0:0:0: Direct-Access TOSHIBA MK1422FCV 0811 PQ: 0 ANSI: 0 [ 124.200905] sd 7:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). [ 124.203748] sd 7:0:0:0: [sdb] READ CAPACITY(16) failed [ 124.203752] sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 124.203755] sd 7:0:0:0: [sdb] Use 0xffffffff as device size [ 124.203758] sd 7:0:0:0: [sdb] 4294967296 512-byte hardware sectors (2199023 MB) [ 124.204294] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 124.204298] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 124.205176] sd 7:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). [ 124.209119] sd 7:0:0:0: [sdb] READ CAPACITY(16) failed [ 124.209122] sd 7:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 124.209125] sd 7:0:0:0: [sdb] Use 0xffffffff as device size [ 124.209127] sd 7:0:0:0: [sdb] 4294967296 512-byte hardware sectors (2199023 MB) [ 124.212119] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 124.212123] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 124.212127] sdb:<6>usb 6-8: reset high speed USB device using ehci_hcd and address 4 ============================================================ USB TO IDE 使用時 (FreeBSD) ------------------------------------------------------------ umass1: on uhub5 da1 at umass-sim1 bus 1 target 0 lun 0 da1: Fixed Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: ILLEGAL REQUEST, Invalid field in CDB (da1:umass-sim1:1:0:0): SERVICE ACTION IN(16). CDB: 9e 10 0 0 0 0 0 0 0 0 0 0 0 c 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): ILLEGAL REQUEST asc:24,0 (da1:umass-sim1:1:0:0): Invalid field in CDB (da1:umass-sim1:1:0:0): Unretryable error (da1:umass-sim1:1:0:0): SERVICE ACTION IN(16). CDB: 9e 10 0 0 0 0 0 0 0 0 0 0 0 c 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): ILLEGAL REQUEST asc:24,0 (da1:umass-sim1:1:0:0): Invalid field in CDB (da1:umass-sim1:1:0:0): Unretryable error (da1:umass-sim1:1:0:0): SERVICE ACTION IN(16). CDB: 9e 10 0 0 0 0 0 0 0 0 0 0 0 c 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): ILLEGAL REQUEST asc:24,0 (da1:umass-sim1:1:0:0): Invalid field in CDB (da1:umass-sim1:1:0:0): Unretryable error (da1:umass-sim1:1:0:0): SERVICE ACTION IN(16). CDB: 9e 10 0 0 0 0 0 0 0 0 0 0 0 c 0 0 (da1:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da1:umass-sim1:1:0:0): SCSI Status: Check Condition (da1:umass-sim1:1:0:0): ILLEGAL REQUEST asc:24,0 (da1:umass-sim1:1:0:0): Invalid field in CDB (da1:umass-sim1:1:0:0): Unretryable error ============================================================ ATA 変換ケーブル使用時 (Linux) dmesg ------------------------------------------------------------ [ 6.781815] ide0: BM-DMA at 0xff00-0xff07 [ 6.781872] Probing IDE interface ide0... [ 7.072434] hda: TOSHIBA MK1422FCV, ATA DISK drive [ 8.016647] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 8.016665] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 8.016690] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 11.874991] hda: max request size: 128KiB [ 11.874991] hda: 167960 sectors (85 MB) w/32KiB Cache, CHS=988/10/17 [ 11.874991] hda: hda4 [ 11.885530] hda: p4 exceeds device capacity [ 12.532670] hda: rw=0, want=393224, limit=167960 [ 12.532724] Buffer I/O error on device hda4, logical block 49152 [ 12.532833] hda: rw=0, want=393224, limit=167960 [ 12.532886] Buffer I/O error on device hda4, logical block 49152 [ 12.533000] hda: rw=0, want=393336, limit=167960 [ 12.533053] Buffer I/O error on device hda4, logical block 49166 [ 12.533162] hda: rw=0, want=393336, limit=167960 [ 12.533215] Buffer I/O error on device hda4, logical block 49166 [ 12.533379] hda: rw=0, want=393344, limit=167960 [ 12.533432] Buffer I/O error on device hda4, logical block 49167 [ 12.533541] hda: rw=0, want=393344, limit=167960 [ 12.533594] Buffer I/O error on device hda4, logical block 49167 [ 12.533705] hda: rw=0, want=393344, limit=167960 [ 12.533759] Buffer I/O error on device hda4, logical block 49167 [ 12.533870] hda: rw=0, want=393344, limit=167960 [ 12.533923] Buffer I/O error on device hda4, logical block 49167 [ 12.534034] hda: rw=0, want=393344, limit=167960 [ 12.534088] Buffer I/O error on device hda4, logical block 49167 [ 12.534199] hda: rw=0, want=393344, limit=167960 [ 12.534253] Buffer I/O error on device hda4, logical block 49167 [ 12.534364] hda: rw=0, want=393344, limit=167960 [ 12.534475] hda: rw=0, want=393288, limit=167960 [ 12.534585] hda: rw=0, want=393336, limit=167960 [ 12.534695] hda: rw=0, want=393344, limit=167960 [ 12.534809] hda: rw=0, want=393344, limit=167960 [ 25.767919] hda: rw=0, want=393224, limit=167960 [ 25.767919] Buffer I/O error on device hda4, logical block 49152 [ 25.767919] hda: rw=0, want=393224, limit=167960 [ 25.767919] Buffer I/O error on device hda4, logical block 49152 [ 25.767919] hda: rw=0, want=393336, limit=167960 [ 25.767919] hda: rw=0, want=393336, limit=167960 [ 25.768061] hda: rw=0, want=393344, limit=167960 [ 25.768169] hda: rw=0, want=393344, limit=167960 [ 25.768280] hda: rw=0, want=393344, limit=167960 [ 25.768390] hda: rw=0, want=393344, limit=167960 [ 25.768500] hda: rw=0, want=393344, limit=167960 [ 25.768610] hda: rw=0, want=393344, limit=167960 [ 25.768721] hda: rw=0, want=393344, limit=167960 [ 25.768833] hda: rw=0, want=393288, limit=167960 [ 25.768943] hda: rw=0, want=393336, limit=167960 [ 25.769054] hda: rw=0, want=393344, limit=167960 [ 25.769164] hda: rw=0, want=393344, limit=167960 [ 25.900904] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 77.662468] hda: rw=0, want=393224, limit=167960 [ 77.662468] Buffer I/O error on device hda4, logical block 49152 [ 77.662468] hda: rw=0, want=393224, limit=167960 [ 77.662468] Buffer I/O error on device hda4, logical block 49152 [ 77.662468] hda: rw=0, want=393336, limit=167960 [ 77.662468] Buffer I/O error on device hda4, logical block 49166 [ 77.662468] hda: rw=0, want=393336, limit=167960 [ 77.662468] Buffer I/O error on device hda4, logical block 49166 [ 77.662468] hda: rw=0, want=393344, limit=167960 [ 77.662468] Buffer I/O error on device hda4, logical block 49167 [ 77.662468] hda: rw=0, want=393344, limit=167960 [ 77.662468] Buffer I/O error on device hda4, logical block 49167 [ 77.662468] hda: rw=0, want=393344, limit=167960 [ 77.666483] Buffer I/O error on device hda4, logical block 49167 [ 77.670479] hda: rw=0, want=393344, limit=167960 [ 77.670479] Buffer I/O error on device hda4, logical block 49167 [ 77.670479] hda: rw=0, want=393344, limit=167960 [ 77.670479] Buffer I/O error on device hda4, logical block 49167 [ 77.670479] hda: rw=0, want=393344, limit=167960 [ 77.670479] hda: rw=0, want=393344, limit=167960 [ 77.670479] hda: rw=0, want=393288, limit=167960 [ 77.670479] hda: rw=0, want=393336, limit=167960 [ 77.670479] hda: rw=0, want=393344, limit=167960 [ 77.670479] hda: rw=0, want=393344, limit=167960 ============================================================ ATA 変換ケーブル使用時 (Linux) smartctl ------------------------------------------------------------ $ smartctl -a /dev/hda smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK1422FCV Serial Number: [No Information Found] Firmware Version: V5.03 I Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Sep 20 00:25:33 2009 JST SMART is only available in ATA Version 3 Revision 3 or greater. We will try to proceed in spite of this. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. Checking for SMART support by trying SMART ENABLE command. Error SMART Enable failed: Input/output error SMART ENABLE failed - this establishes that this device lacks SMART functionality. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. ============================================================ ATA 変換ケーブル使用時 (Linux) dd bs=4096 ------------------------------------------------------------ 85995520 bytes (86 MB) copied, 483.048 s, 178 kB/s ============================================================ ATA 変換ケーブル使用時 (Linux) shred -n 3 ------------------------------------------------------------ real 6m26.643s